The CS 5000 is one of the industry’s most economical and effective walk-through metal detectors. Its microprocessor technology offers greater sensitivity for detecting weapons from the archway to the floor. It is constructed with attractive scratch and mar-resistant laminate with resilient end caps to endure high-volume security checkpoint usage.
Operating: -4° F (-20° C) to +140° F (60° C)
Humidity to 95% non condensing
Storage: -40° F (-40° C) to 158° F (70° C)
Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 14 watts; no rewiring,
switching or adjustments required. Power supply meets UL, CSA, TUV
and VDE standards.
Weatherproofing / Foreign Object Protection Standards
Meets IP 31, IEC Standard. “Degrees of Protection provided by Enclosures,”
100% sensor coil Faraday shielding; special Garrett built-in circuitry
for noise suppression and ignoring x-ray monitor horizontal sync.
Built-in and resettable with current reading available on LCD panel.
Multiple channels permit several CS 5000s and other Garrett detectors
to operate simultaneously in close proximity.
Ready light indicates unit is operational; alarm lights and audible
alarms are activated when the target amount of metal is detected;
LED bar graph indicates amplitude of alarm signal.
Dual-level access codes required to set or change all sensitivity settings
and detection programs; one level for use by supervisors in
selecting programs and sensitivity and the other for initial set-up and
overall control; non-resettable sequence code logs all changes made
whenever sensitivity codes are accessed. An audible alarm reports
unauthorized attempts at access.
Improves analysis of detection signal; increases throughput; helps
eliminate “false alarms” and also provides accurate traffic counter.
Solid state switches (low voltage AC or DC) for operating external
alarms and control devices.
Programs designed to eliminate the problem of dissimilar targets
canceling each other.
Attractive scratch and mar-resistant laminate with resilient end caps;
control panel and cross members made of heavy duty aluminum.
24 months, parts and labor
|Passageway Interior Size|
Width 30″ (0.76 m)
Height 80″ (2.03 m)
Depth 23″ (0.58 m)
Overall Exterior Size
Width 35″ (0.90 m)
Height 87″ (2.21 m)
Depth 23″ (0.58 m)
Width 35.5″ (0.90 m)
Height 91.5″ (2.32 m)
Depth 6.25″ (.16 m)
|Shipping Weight: 135 lbs. (61.2 kg)|